COMPRESSOR (for 3UR-FE, 3UR-FBE) > DISASSEMBLY |
| 1. REMOVE COOLER BRACKET |
![]() |
Detach the clamp.
Remove the screw and the cooler bracket.
| 2. REMOVE MAGNET CLUTCH ASSEMBLY |
![]() |
Clamp the cooler compressor in a vise.
Using SST, hold the magnet clutch hub.
Remove the bolt, magnet clutch hub and magnet clutch washer(s).
![]() |
Using a snap ring expander, remove the snap ring and the magnet clutch rotor.
Disconnect the connector.
![]() |
Using a snap ring expander, remove the snap ring and magnet clutch stator.