Home › SUSPENSION & AXLE › AXLE › FRONT AXLE HUB

FRONT AXLE HUB > DISASSEMBLY

for Preparation Click here


NOTICE:
Do not allow foreign matter, etc. to contact the ABS rotor bearing.



1. REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)


    F042757E01
  1. Using SST and a hammer, release the staked part of the adjusting nut.

    SST
    09930-00010  

  1. Install a nut to the front axle hub, and fix it in a vise.



    C179623E01
  1. Using SST and the L-type handle, remove the front wheel adjusting nut.

    SST
    09602-60010  



2. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY


    F042760E02
  1. Gently fix the front axle hub in a vise.

    NOTICE:
    Do not damage the threads of the hub bolts.

  1. Using SST, remove the bearing.

    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
    09950-60010   (09951-00550)



    C179624E01
  1. If part of the bearing remains in the front axle hub, use SST to remove it.

    SST
    09950-00020  
    09950-00030  



3. REMOVE FRONT AXLE HUB OIL SEAL


    F042761
  1. Using a screwdriver, pry the oil seal.



4. REMOVE PLUG (for 2WD)


    C222404
  1. Using a screwdriver and hammer, remove the plug.