FRONT AXLE HUB > REASSEMBLY |
| 1. INSTALL PLUG (for 2WD) |
![]() |
Using the SST and a hammer, install a new plug.
| 2. INSTALL FRONT AXLE HUB OIL SEAL |
![]() |
Using SST and a press, press in a new oil seal.
| 3. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY |
![]() |
Using SST and a press, press in a new bearing.
| 4. INSTALL FRONT WHEEL ADJUSTING NUT (for 2WD) |
![]() |
Using SST, install a new adjusting nut.