Home › ENGINE ยท 1GR-FE › LUBRICATION › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the relief valve with engine oil and insert the relief valve and spring into the valve hole.

  1. Install the relief valve plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }



2. INSTALL OIL PUMP COVER
  1. Apply fresh engine oil to the drive and driven rotors.



    A223654E01
  1. Place the drive and driven rotors into the timing chain cover with the marks facing the oil pump cover side.
    Text in Illustration 
    *a
    Mark



    A225445
  1. Install the oil pump cover with the 8 bolts and screw.

    Torque:
    for screw:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }
    for bolt:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

    Text in Illustration 
    V100135
    Bolt
    V100136
    Screw