FRONT SPEED SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT WHEEL |
| 4. REMOVE FRONT SKID CONTROL SENSOR WIRE LH |
![]() |
Disconnect the connector (labeled A) from the front speed sensor.
Detach the 3 clips (labeled B) and remove the clamp bolt (labeled C).
![]() |
Disconnect the connector (labeled D).
Remove the 3 bolts (labeled E), 3 harness clamps (labeled F) and sensor wire.
| 5. REMOVE FRONT SPEED SENSOR LH |
![]() |
Remove the hexagon socket head cap bolt (labeled A) and speed sensor (labeled B) from the knuckle.
| 6. REMOVE FRONT SKID CONTROL SENSOR CLAMP LH |
Remove the bolt (labeled C) and skid control sensor clamp (labeled D) from the knuckle.
| 7. REMOVE FRONT SKID CONTROL SENSOR WIRE RH |
![]() |
Disconnect the connector (labeled A) from the front speed sensor.
Detach the 3 clips (labeled B) and remove the clamp bolt (labeled C).
![]() |
Disconnect the connector (labeled D).
Remove the connector (labeled D) from the skid control sensor clamp (labeled H).
Remove the 2 bolts (labeled E) and 2 harness clamps (labeled F).
Remove the bolt (labeled G) and skid control sensor clamp (labeled H).
| 8. REMOVE FRONT SPEED SENSOR RH |
![]() |
Remove the hexagon socket head cap bolt (labeled A) and speed sensor (labeled B) from the knuckle.
| 9. REMOVE FRONT SKID CONTROL SENSOR CLAMP RH |
Remove the bolt (labeled C) and skid control sensor clamp (labeled D) from the knuckle.