Home › STEERING › POWER STEERING › POWER STEERING SYSTEM (for 1UR-FE)

POWER STEERING SYSTEM (for 1UR-FE) > TERMINALS OF ECU

for Preparation Click here



CHECK POWER STEERING ECU

C214366E05


Text in Illustration 
*1
Power Steering ECU
-
-
  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    J119-3 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    J119-1 (CANH) - J119-2 (CANL)
    GR - W
    CAN communication
    Ignition switch off
    54 to 69 Ω
    J119-5 (IG) - J119-3 (GND)
    SB - W-B
    IG power supply
    Ignition switch ON
    11 to 14 V
    J119-7 (SOF+) - J119-8 (SOF-)
    LG - Y
    Power steering solenoid valve signal
    1. Engine idling
    2. Steering wheel turned to right or left
    Pulse generation
    If the result is not as specified, the ECU may have a malfunction.