Home › STEERING › POWER STEERING › POWER STEERING SYSTEM (for 1UR-FE)

POWER STEERING SYSTEM (for 1UR-FE) > FAIL-SAFE CHART

for Preparation Click here


If a problem occurs in the power steering system, the power steering warning light in the combination meter comes on and power steering assist is locked at a particular point or decreased simultaneously.

Power Steering System 
DTC Code
Detection Condition
Fail-safe Operation
C1531
Short circuit between power steering solenoid valve terminal SOF+ and ground
Assist force is restricted.
Short circuit between power steering solenoid valve terminal SOF- and ground
Power assist continues as normal.
Short circuit between power steering solenoid valve terminals SOF+ and SOF-
Assist force is restricted.
Power steering solenoid valve open circuit
Assist force is restricted.
C1231
Steering angle sensor circuit malfunction
The power steering system is limited depending on which ECU has lost communication. For details, refer to Fail-safe Function.
C1544
Engine speed signal malfunction
C1547
Vehicle speed signal malfunction
U0073
Control module communication bus off

FAIL-SAFE FUNCTION
If the power steering ECU cannot receive the steering angle signal, steering zero point memory, vehicle speed signal or engine speed signal, the power steering warning light in the combination meter illuminates and the vehicle enters fail-safe mode.

Malfunction Area
Fail-Safe Mode
Steering Angle Signal
Steering Zero Point Memory
Vehicle Speed Signal
Engine Speed Signal
X
-
-
-
  1. V-Q control fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation normal
-
X
-
-
  1. V-Q control normal
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation normal
-
-
X
-
Vehicle speed of 80 km/h (50 mph) assumed and each compensation performed
-
-
-
X
  1. V-Q control normal
  2. Steering angle compensation normal
  3. Steering wheel return compensation normal
  4. Engine speed compensation disabled
X
X
-
-
  1. V-Q control fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation normal
X
-
X
-
Fluid flow maintained at constant rate
X
-
-
X
  1. V-Q control characteristics fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation disabled
-
X
X
-
  1. V-Q control fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation normal
-
X
-
X
  1. V-Q control normal
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation disabled
-
-
X
X
  1. Vehicle speed of 80 km/h (50 mph) assumed and each compensation performed
  2. Engine speed compensation disabled
-
X
X
X
  1. V-Q control characteristics fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation disabled
X
-
X
X
Fluid flow maintained at constant rate
X
X
-
X
  1. V-Q control characteristics fixed
  2. Steering angle compensation disabled
  3. Steering wheel return compensation disabled
  4. Engine speed compensation disabled
X
X
X
-
Fluid flow maintained at constant rate
X
X
X
X
Fluid flow maintained at constant rate

HINT:
X: Malfunction