BRAKE PEDAL > ADJUSTMENT |
| 1. CHECK BRAKE PEDAL HEIGHT |
Check the brake pedal height.
Turn back the carpet.
Remove the tibia pad.
![]() |
Measure the shortest distance between the brake pedal surface and dash panel.
| 2. CHECK AND ADJUST STOP LIGHT SWITCH ASSEMBLY |
Disconnect the stop light switch connector.
Turn the stop light switch counterclockwise and remove it.
![]() |
Insert the stop light switch until the body hits the cushion.
Make a quarter turn clockwise to install the stop light switch.
Connect the stop light switch connector.
Check the protrusion of the rod.
| 3. CHECK PEDAL FREE PLAY |
![]() |
Stop the engine and depress the brake pedal several times until there is no more vacuum left in the booster.
Push in the brake pedal until the beginning of the resistance is felt. Measure the distance as shown in the illustration.
| 4. CHECK PEDAL RESERVE DISTANCE |
Release the parking brake pedal.
![]() |
With the engine running, depress the brake pedal and measure the pedal reserve distance as shown in the illustration.