Home › SUSPENSION & AXLE › SUSPENSION › FRONT SHOCK ABSORBER

FRONT SHOCK ABSORBER > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE FRONT WHEEL


2. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING LH


C155964
  1. Remove the nut and bolt from the shock absorber lower side.

    NOTICE:
    To prevent the shock absorber with coil spring from falling, leave the bolt inserted.



    C155965
  1. Remove the 4 nuts.

  1. Remove the bolt (lower side) and shock absorber with coil spring.