Home
›
BODY ELECTRICAL
›
NAVIGATION
›
NAVIGATION SYSTEM (for SD)
NAVIGATION SYSTEM (for SD) > Pressing Power Switch does not Turn on System
for Preparation
Click here
INSPECTION PROCEDURE
1.CHECK VEHICLE CONDITION
Check that conditions in the cabin are not likely to cause condensation.
HINT:
This problem occurs if the cabin is humid and the temperature rapidly changes. This condition may produce condensation, resulting in a short circuit.
OK:
Condensation is not likely to occur.
NG
DRY OUT CABIN AND RECHECK CONDITIONS
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (
Click here
)