STARTER (for 1.6 kW Type) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Install the flywheel housing side cover.
![]() |
Install the starter with the 2 bolts.
![]() |
Connect the starter wire with the nut.
Connect the starter connector.
Connect the 2 wire harness clamps.
| 2. INSTALL STARTER COVER |
![]() |
Install the starter cover with the 3 bolts.
| 3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH |
Install the exhaust manifold RH (Click here).
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |