Home › DRIVE LINE › DRIVE SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for 4WD)

FRONT DRIVE SHAFT ASSEMBLY (for 4WD) > INSPECTION

for Preparation Click here



1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

NOTICE:
Move the drive shaft while keeping it level.



    C124190
  1. Check if there is excessive play in the outboard joint.

  1. Check if the inboard joint shaft slides smoothly in the thrust direction.

  1. Check if there is excessive play in the radial direction of the inboard joint shaft.

  1. Check the boots for damage.