FRONT CRANKSHAFT OIL SEAL > INSTALLATION |
| 1. INSTALL FRONT CRANKSHAFT OIL SEAL |
![]() |
Apply MP grease to the lip of a new oil seal.
Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.
| 2. INSTALL CRANKSHAFT PULLEY |
![]() |
Using SST, install the crankshaft pulley with the pulley set bolt.
| 3. INSTALL OIL FILTER BRACKET |
Install the oil filter bracket and a new gasket with the 2 nuts and bolt.
| 4. CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY |
![]() |
Connect the 2 hoses and water by-pass pipe.
| *1 | Upward |
| *2 | Rearward |
Install the 3 bolts.
| 5. INSTALL RADIATOR ASSEMBLY |