REAR LEAF SPRING > REMOVAL |
| 1. SUPPORT BODY WITH SAFETY STANDS |
Jack up and support the body on safety stands.
Lower the axle housing until the leaf spring tension is free, and keep it at this position.
| 2. REMOVE SPARE TIRE |
| 3. REMOVE REAR WHEEL |
| 4. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY |
![]() |
Remove the 3 bolts and disconnect the cable from the vehicle.
| 5. DISCONNECT REAR SHOCK ABSORBER ASSEMBLY LH |
![]() |
Support the rear axle housing with a jack using a wooden block to avoid damage.
![]() |
Remove the bolt and nut, and disconnect the shock absorber lower side from the axle housing.
| 6. REMOVE REAR SPRING U BOLT |
![]() |
Remove the 4 nuts, 4 washers and spring seat.
Remove the 2 U bolts.
| 7. REMOVE REAR SPRING BUMPER SUB-ASSEMBLY |
Remove the spring bumper.
| 8. REMOVE REAR SPRING ASSEMBLY LH |
![]() |
Remove the nut, washer and bolt from the front side.
![]() |
Remove the 2 nuts, 2 washers, shackle outer plate, No. 2 spring shackle plate and leaf spring from the rear side.
| 9. REMOVE TUBE |
![]() |
Using a brass bar and hammer, remove the tube from the frame.
| 10. REMOVE REAR SPRING SHACKLE BUSH |
Remove the 2 bushes from the frame.