Home › STEERING › POWER STEERING › VANE PUMP (for 3UR-FE, 3UR-FBE)

VANE PUMP (for 3UR-FE, 3UR-FBE) > DISASSEMBLY

for Preparation Click here



1. FIX VANE PUMP ASSEMBLY


    C158820E01
  1. Using SST, hold the vane pump in a vise.

    SST
    09630-00014   (09631-00132)



2. REMOVE POWER STEERING SUCTION PORT UNION


C158821
  1. Remove the bolt and suction port union from the vane pump.

  1. Using a screwdriver, remove the O-ring from the suction port union.



3. REMOVE FLOW CONTROL VALVE


C210753
  1. Remove the pressure port union.

  1. Remove the O-ring from the pressure port union.

  1. Remove the flow control valve and compression spring.



4. REMOVE VANE PUMP REAR HOUSING


    C131230
  1. Remove the 4 bolts and rear housing from the front housing.



    C107025E02
  1. Using a screwdriver, remove the O-ring from the rear housing.

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE VANE PUMP SHAFT WITH VANE PUMP PULLEY


    C131231
  1. Using 2 screwdrivers, remove the snap ring from the vane pump shaft.

  1. Remove the vane pump shaft with vane pump pulley.

    NOTICE:
    Be careful not to drop or damage the vane pump shaft with vane pump pulley. If it is damaged, replace the vane pump assembly.



6. REMOVE VANE PUMP ROTOR


C114697
  1. Remove the 10 vane plates.

    NOTICE:
    Take care not to drop the vane plate.

  1. Remove the vane pump rotor.



7. REMOVE VANE PUMP CAM RING


C114698
  1. Remove the cam ring from the front housing.



8. REMOVE VANE PUMP FRONT SIDE PLATE


C114699
  1. Remove the front side plate from the front housing.



    C107029E02
  1. Using a screwdriver, remove the O-ring from the front side plate.

    HINT:
    Tape the screwdriver tip before use.



    C114700
  1. Remove the O-ring from the front housing.



9. REMOVE VANE PUMP HOUSING OIL SEAL


C114701E02
  1. Using a screwdriver and piece of cloth, pry out the oil seal.

    NOTICE:
    Be careful not to damage the front housing.