FRONT SEAT INNER BELT ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
Remove the front seat (Click here).
| 4. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
Remove the front seat (Click here).
| 5. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Manual Seat) |
![]() |
Remove the screw.
Detach the 3 claws in the order shown in the illustration, and then remove the cushion shield.
| 6. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
Driver Side:
Disconnect the 2 connectors and detach the 4 clamps.
Passenger Side:
Disconnect the connector and detach the clamp.
![]() |
Remove the nut and front seat inner belt.