Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR SEAT OUTER BELT ASSEMBLY (for CrewMax) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


B169124E01
  1. Align the adjuster positioning hole with the claw, and install the adjuster with the 2 bolts.

    HINT:
    First install the upper bolt, and then install the lower bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL REAR SEAT OUTER BELT ASSEMBLY


B169111E01
  1. Align the vehicle's claws with the seat belt retractor positioning holes.

  1. Install the seat belt with the 2 bolts.

    HINT:
    First install bolt A, and then install bolt B.

    Torque:
    for bolt A:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }
    for bolt B:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B169110
  1. Install the shoulder anchor with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY


B165833
  1. Pass the rear seat outer belt floor anchor through the quarter trim panel.

  1. Attach the 4 clips to install the front quarter trim panel.

  1. Install the 2 bolts.



    B165712
  1. Attach the claw to install the cover.



4. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY


B169109
  1. for LH Side:
    Attach the 4 clips to install the lower quarter trim panel lower.



    B173407
  1. for RH Side:
    Attach the 3 clips to install the lower quarter trim panel lower.



    B169108
  1. Install the seat belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B169107
  1. Attach the 2 claws to install the cover.



5. INSTALL REAR DOOR SCUFF PLATE


B165842
  1. Attach the 6 claws and 2 clips to install the rear door scuff plate.



6. INSTALL BACK PANEL TRIM LH
  1. Attach the 8 clips to install the back panel trim.



  1. Install the package holder net hook.


    B170105E05



7. INSTALL BACK PANEL TRIM RH


B169224E05
  1. Attach the 8 clips to install the back panel trim.

  1. Install the package holder net hook.



8. INSTALL REAR SEAT ASSEMBLY
  1. Install the rear seat .