FRONT SEAT OUTER BELT ASSEMBLY (for Center Seat) > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
Remove the front seat (Click here).
| 2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
Remove the front seat (Click here).
| 3. REMOVE CENTER FRONT SEAT ASSEMBLY |
Remove the front seat .
| 4. REMOVE CENTER SEAT CUSHION SHIELD LH |
![]() |
Using a T30 "TORX" socket, remove the bolt.
Detach the 7 claws and 2 clips, and remove the cushion shield.
| 5. REMOVE CENTER SEAT CUSHION SHIELD RH |
![]() |
Using a T30 "TORX" socket, remove the bolt.
Detach the 7 claws and 3 clips, and remove the cushion shield.
| 6. DISCONNECT CENTER FRONT SEAT BELT ASSEMBLY RH |
![]() |
Remove the bolt and seat belt anchor.
| 7. REMOVE CENTER SEATBACK ASSEMBLY |
![]() |
Remove the 2 wire harness clamps from the center seatback frame.
![]() |
LH Side:
Using a T40 "TORX" socket, remove the 2 bolts.
RH Side:
Using a T55 "TORX" socket, remove the 2 bolts.
Remove the center seatback.
| 8. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 9. REMOVE FRONT SEAT SHOULDER BELT COVER |
![]() |
Using a T10 "TORX" socket, remove the 2 screws and shoulder belt cover.
| 10. REMOVE UPPER REAR SEATBACK LOCK BEZEL |
![]() |
Detach the 4 claws and remove the lock bezel.
Disconnect the seat belt from the shoulder belt cover.
| 11. REMOVE LOWER FRONT SEAT SHOULDER BELT COVER |
![]() |
Using a T30 "TORX" socket, remove the 2 bolts and shoulder belt cover.
| 12. REMOVE RECLINING REMOTE CONTROL BEZEL |
![]() |
Detach the 2 clips and claw, and then remove the bezel.
| 13. REMOVE FRONT SEAT TRAY |
![]() |
Detach the 5 clips and remove the tray.
| 14. REMOVE CENTER FRONT SEAT ARMREST COVER |
![]() |
Remove the 2 screws and armrest cover.
| 15. REMOVE SEAT FASTENER COVER |
![]() |
Using a screwdriver, detach the 6 claws and remove the 2 covers.
| 16. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY |
![]() |
Remove the 6 screws.
![]() |
Detach the 21 claws and remove the screw.
![]() |
LH Side:
Disconnect the cable from the center seatback frame inner side.
![]() |
RH Side:
Disconnect the cable from the center seatback frame inner side.
| 17. REMOVE FRONT SEAT HEADREST SUPPORT |
![]() |
Detach the 4 claws and remove the 2 headrest supports.
| 18. REMOVE CENTER FRONT SEAT BELT ASSEMBLY RH |
![]() |
Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.