Home › BODY › ENGINE HOOD / DOOR › REAR DOOR (for Double Cab)

REAR DOOR (for Double Cab) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH



B166225E03

  1. Check that the clearance measurements of areas A to J are within the standard range.

    Standard measurement:

    Area
    Specified Condition
    Area
    Specified Condition
    A
    4.7 to 7.7 mm (0.185 to 0.303 in.)
    F
    2.5 to 5.5 mm (0.0984 to 0.217 in.)
    B
    -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)
    G
    3.5 to 6.5 mm (0.138 to 0.256 in.)
    C
    3.2 to 6.2 mm (0.126 to 0.244 in.)
    H
    -1.4 to 1.6 mm (0.0551 to 0.0630 in.)
    D
    2.7 to 5.7 mm (0.106 to 0.224 in.)
    I
    4.0 to 7.0 mm (0.156 to 0.277 in.)
    E
    3.2 to 6.2 mm (0.126 to 0.244 in.)
    J
    -1.1 to 1.9 mm (-0.0433 to 0.0748 in.)