REAR DOOR LOCK (for CrewMax) > INSPECTION |
| 1. INSPECT REAR DOOR LOCK ASSEMBLY LH |
Check the door lock motor.
![]() |
Apply battery voltage to the door lock and check operation of the door lock.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL) | Lock |
| Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L) | Unlock |
Check the door lock position switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 6 (LSSR) - 9 (E) | Unlock | Below 1 Ω |
| Lock | 10 kΩ or higher |
| 2. INSPECT REAR DOOR LOCK ASSEMBLY RH |
Check the door lock motor.
![]() |
Apply battery voltage to the door lock and check operation of the door lock.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL) | Lock |
| Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L) | Unlock |
Check the door lock position switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 6 (LSSR) - 9 (E) | Unlock | Below 1 Ω |
| Lock | 10 kΩ or higher |