ENGINE COOLANT TEMPERATURE SENSOR > INSPECTION |
| 1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR |

Partially soak the sensor in water and warm up the water.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Approx. 20°C (68°F) | 2.32 k to 2.59 kΩ |
| 1 - 2 | Approx. 80°C (176°F) | 0.310 k to 0.326 kΩ |