Home › BODY ELECTRICAL › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Main Body 
    Display
    Default
    Contents
    Setting
    Unlock Key Twice
    ON
    Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.
    ON/OFF
    Auto lock
    OFF
    Function that locks all doors when vehicle speed reaches a certain level.
    ON/OFF
    Auto Lock/Shift
    ON
    With engine running and all doors closed, function that locks all doors when lever is moved to P from any position other than P.
    ON/OFF
    Auto Unlock/Shift
    ON
    Function that unlocks all doors when lever is moved to P from any position other than P while ignition switch is ON.
    ON/OFF
    All Unlock/Open-Close
    OFF
    Function that unlocks all other doors when opening driver door within 10 seconds after turning ignition switch ON.
    ON/OFF