Home › BODY › INSTRUMENT PANEL › INSTRUMENT PANEL SAFETY PAD (for Column Shift Type)

INSTRUMENT PANEL SAFETY PAD (for Column Shift Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (for Automatic Air Conditioning System)


    B161768
  1. Disconnect the sensor connector.

  1. Detach the 2 claws and remove the sensor.



2. REMOVE NO. 1 INSTRUMENT PANEL PIN


  1. Remove the 2 screws and 2 pins.


    B161142



3. REMOVE NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT


  1. Remove the 5 screws and duct.


    B161141



4. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B160598
  1. Remove the 2 screws.

  1. Detach the claw and remove the duct.



5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY


    B160595
  1. Remove the 3 screws and register.



6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B160599
  1. Remove the 2 screws.

  1. Detach the claw and remove the duct.



7. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B160597
  1. Remove the 3 screws and nozzle.



8. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    B160596
  1. Remove the 3 screws and register.



9. REMOVE ACCESSORY METER ASSEMBLY


    B160594
  1. Disconnect the accessory meter connector.

  1. Remove the 3 screws and accessory meter.



10. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
  1. Detach the clamp.



  1. Remove the 2 screws and antenna.


    B164817



11. REMOVE NO. 2 INSTRUMENT PANEL WIRE


  1. Detach the wire from the clamps to remove the wire from the instrument panel.


    B161145



12. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    B166453
  1. Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.



    B166454
  1. Remove the 2 screws.



    B166455E01
  1. Detach the 5 hooks (A).

  1. Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.