Home › BODY ELECTRICAL › METER › COMBINATION METER

COMBINATION METER > INSTALLATION

for Preparation Click here



1. INSTALL COMBINATION METER ASSEMBLY


    E141678
  1. Connect the connector and clamp.



    E141677
  1. Install the combination meter with the 4 screws.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
  1. Install the wire harness to the finish panel slots.



  1. Connect the connectors and clamps.


    E145053E01



    E145049
  1. Attach the 12 clips to install the finish panel.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL