Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH and LH side.
  2. The procedures listed below are for the LH side.
  3. A bolt without a torque specification is shown in the standard bolt chart (Click here)



1. INSTALL HEADLIGHT ASSEMBLY LH


    E142781
  1. Connect the connectors and install the headlight.

  1. Install the 2 screws and bolt.



2. INSTALL FRONT END PANEL LH


B165496
  1. Attach the 2 pins to install the panel.

  1. Install the 2 clips.