Home › BODY ELECTRICAL › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE HIGH MOUNTED STOP LIGHT LENS

HINT:
Perform these procedures only when replacing the bulb.



    E145745
  1. Remove the 4 screws and lens.

  1. Remove the gasket.



    E147863
  1. Remove the 3 bulbs.



2. REMOVE LIGHT BULB


    E142778
  1. Turn the bulb/socket unit in the direction indicated by the arrow and pull to remove it.

  1. Remove the bulb from the socket.