HEADLIGHT DIMMER SWITCH > INSPECTION |
| 1. INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY |
Check the light control switch.
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 12 (EL) - 18 (T) | Light control switch TAIL | Below 1 Ω |
| 12 (EL) - 18 (T) - 20 (H) | Light control switch HEAD | |
| 12 (EL) - 19 (A) | Light control switch AUTO |
Check the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 17 (HF) - 11 (HU) - 12 (EL) | Headlight dimmer switch FLASH | Below 1 Ω |
| 16 (HL) - 12 (EL) | Headlight dimmer switch LOW BEAM | |
| 11 (HU) - 12 (EL) | Headlight dimmer switch HI BEAM |
Check the turn signal switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 12 (EL) - 13 (TR) | Turn signal switch right turn | Below 1 Ω |
| 12 (EL) - 15 (TL) | Turn signal switch left turn |
Check the fog light switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (LFG) - 4 (BFG) | Front fog light switch ON | Below 1 Ω |