INSTRUMENT PANEL SAFETY PAD (for Floor Shift Type) > DISASSEMBLY |
| 1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (for Automatic Air Conditioning System) |
![]() |
Disconnect the sensor connector.
Detach the 2 claws and remove the sensor.
| 2. REMOVE NO. 1 INSTRUMENT PANEL PIN |
Remove the 2 screws and 2 pins.

| 3. REMOVE NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT |
Remove the 5 screws and duct.

| 4. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the 2 screws.
Detach the claw and remove the duct.
| 5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Remove the 3 screws and register.
| 6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the 2 screws.
Detach the claw and remove the duct.
| 7. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Remove the 3 screws and nozzle.
| 8. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Remove the 3 screws and register.
| 9. REMOVE ACCESSORY METER ASSEMBLY |
![]() |
Disconnect the accessory meter connector.
Remove the 3 screws and accessory meter.
| 10. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) |
Detach the clamp.
Remove the 2 screws and antenna.

| 11. REMOVE NO. 2 INSTRUMENT PANEL WIRE |
Detach the wire from the clamps to remove the wire from the instrument panel.

| 12. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.
![]() |
Remove the 2 screws.
![]() |
Detach the 5 hooks (A).
Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.