Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT EVAPORATOR TEMPERATURE SENSOR

FRONT EVAPORATOR TEMPERATURE SENSOR > DISASSEMBLY

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT
  1. Remove the air conditioning unit .



2. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY


E145005
  1. Detach the 4 claws and remove the nozzle.



3. REMOVE NO. 3 AIR DUCT SUB-ASSEMBLY


E145006
  1. Detach the 4 claws and remove the duct.



4. REMOVE AIR FILTER COVER PLATE


E145007
  1. Detach the 2 clips and remove the plate.



5. REMOVE CLEAN AIR FILTER


E145009
  1. Remove the filter.



6. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY


E145011
  1. Remove the screw and duct.



7. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


E145012
  1. Remove the 2 screws and amplifier.



8. REMOVE BLOWER WITH FAN MOTOR SUB-ASSEMBLY


E145013
  1. Remove the 3 screws and motor.



9. REMOVE AIR DUCT


E145015
  1. Remove the 2 screws and duct.



10. REMOVE DAMPER SERVO SUB-ASSEMBLY


E145016
  1. Disconnect the 2 connectors.

  1. Remove the 4 screws and damper servo.



    E145027E01
  1. Remove the damper servo.

    1. Detach the claw and remove the main plate.

    2. Remove the 2 screws and damper servo.



    E145028E01
  1. Remove the damper servo.

    1. Detach the claw and remove the main plate.

    2. Remove the 2 screws and damper servo.



11. REMOVE DAMPER SERVO SUB-ASSEMBLY


E145017
  1. Disconnect the connector.

  1. Remove the 3 screws and damper servo.



12. REMOVE BLOWER CASE SUB-ASSEMBLY


E145018E01
  1. Remove the 3 screws.

  1. Detach the 2 claws and remove the case.



13. REMOVE BLOWER DAMPER SERVO SUB-ASSEMBLY


E145019
  1. Disconnect the connector.

  1. Remove the 3 screws and damper servo.



14. REMOVE COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


E146154
  1. Disconnect the connector.

  1. Remove the 3 screws and damper servo.



15. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


E146283
  1. Remove the 3 screws and plate.



    E145020E03
  1. Detach the 3 claws and remove the heater clamp.

  1. Remove the heater radiator unit.



16. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


E145022
  1. Remove the packing.



    E145023E03
  1. Remove the 6 screws and detach the 4 claws.

  1. Remove the blower case (back side).



    E145024
  1. Remove the evaporator from the blower case (front side).



17. REMOVE NO. 1 COOLER THERMISTOR


E145025
  1. Remove the No. 1 cooler thermistor.