Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING AMPLIFIER

AIR CONDITIONING AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY


E191720E01
  1. Install the amplifier with the 2 screws.

  1. for Manual Air Conditioning System:
    Connect the 2 connectors.

  1. for Automatic Air Conditioning System:
    Connect the 3 connectors.



2. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY


E142372
  1. Install the duct with the screw.



3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
for Column Shift Type:
Install the lower No. 2 instrument panel airbag assembly .
for Floor Shift Type:
Install the lower No. 2 instrument panel airbag assembly .


4. INSTALL LOWER INSTRUMENT PANEL
for Column Shift Type:
Install the lower instrument panel .
for Floor Shift Type:
Install the lower instrument panel .


5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
  1. for Column Shift Type:
    Install the instrument panel finish panel .

  1. for Floor Shift Type:
    Install the instrument panel finish panel .



6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. for Column Shift Type:
    Install the No. 2 instrument panel under cover sub-assembly .

  1. for Floor Shift Type:
    Install the No. 2 instrument panel under cover sub-assembly .



7. INSTALL INSTRUMENT SIDE PANEL RH
  1. for Column Shift Type:
    Install the instrument side panel .

  1. for Floor Shift Type:
    Install the instrument side panel .



8. INSTALL COWL SIDE TRIM BOARD RH
  1. for Regular Cab:
    Install the cowl side trim board .

  1. for Double Cab:
    Install the cowl side trim board .

  1. for CrewMax:
    Install the cowl side trim board .



9. INSTALL FRONT DOOR SCUFF PLATE RH
  1. for Regular Cab:
    Install the front door scuff plate .

  1. for Double Cab:
    Install the front door scuff plate .

  1. for CrewMax:
    Install the front door scuff plate .



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


11. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).