Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL (for Floor Shift Type)

AIR CONDITIONING PANEL (for Floor Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)
  1. for DVD:
    Install the navigation receiver assembly with bracket .

  1. for SD:
    Install the navigation receiver assembly with bracket .



2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o USB Audio System)


    E161045
  1. Connect the connectors.

  1. Insert the radio receiver and attach the 3 clips on its backside.

    NOTICE:
    When inserting the radio receiver, do not press its knobs.



    B164786
  1. Install the radio receiver with the 4 bolts.



3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ USB Audio System)


    B230823
  1. Connect the connectors.

  1. Insert the radio receiver and attach the 3 clips on its backside.

    NOTICE:
    When inserting the radio receiver, do not press its knobs.



    B229224
  1. Install the radio receiver with the 4 bolts.



4. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


E146074E05
  1. Connect the connector.

  1. Attach the 4 clips to install the panel.



5. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B161747
  1. Connect the connectors.

  1. Attach the 4 clips to install the finish panel.



6. INSTALL FRONT CONSOLE BOX


    B161746
  1. Install the front console box with the 6 screws and 2 clips.



7. INSTALL REAR CONSOLE BOX ASSEMBLY


    B227981
  1. Install the rear console box with the 2 screws and 4 bolts.

  1. Attach the 2 wire harness clamps.



8. INSTALL CONSOLE BOX CARPET
  1. Install the carpet.



9. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    B227980
  1. except Regular Cab:
    Attach the 2 wire harness clamps and connect the connector.

  1. Attach the 7 clips to install the end panel.



10. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY
  1. w/ Trailer Towing System:
    Connect the connector.

  1. Attach the 6 clips to install the console panel.



  1. Install the clip.


    B171298



11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



13. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B227982
  1. Attach the 12 clips to install the finish panel.

  1. Connect the connector and attach the wire harness clamp.



14. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    B225998
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Attach the 2 claws to install the DLC3.

  1. Install the 4 bolts to install the instrument panel airbag.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



15. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. for Automatic Air Conditioning System:
    Attach the 2 claws to install the sensor.



    B226740
  1. Connect the connectors.

  1. Attach the 9 clips and claw to install the finish panel.

  1. Install the 2 bolts.

  1. Install the hood lock control lever.



16. INSTALL FRONT PILLAR GARNISH LH
  1. Attach the claw to install the front pillar garnish.

  1. Install the assist grip with the 2 bolts.



  1. Attach the 2 claws to install the 2 assist grip plugs.


    B165706



17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for Regular Cab)
  1. Install the front door opening trim weatherstrip.



18. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for Double Cab, CrewMax)
  1. Install the front door opening trim weatherstrip.



19. INSTALL INSTRUMENT SIDE PANEL LH


    B229058
  1. Attach the 7 claws to install the side panel.



20. INSTALL COWL SIDE TRIM BOARD LH


B165704
  1. Attach the 2 clips to install the cowl side trim board.

  1. Install the clip.



21. INSTALL FRONT DOOR SCUFF PLATE LH
  1. for Regular Cab:
    Install the front door scuff plate .

  1. for Double Cab:
    Install the front door scuff plate .

  1. for CrewMax:
    Install the front door scuff plate .



22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


23. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).