Home › SECURITIES › THEFT DETERRENT › THEFT WARNING ECU

THEFT WARNING ECU > INSTALLATION



1. INSTALL GLASS BREAKAGE SENSOR ECU


B167202
  1. Install the ECU with the nut.



    B167201
  1. Install the junction block with the 2 nuts.

  1. Connect the connectors.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
  1. for Column Shift Type:
    Remove the instrument panel finish panel .

  1. for Floor Shift Type:
    Remove the instrument panel finish panel .



3. INSTALL INSTRUMENT SIDE PANEL LH
  1. for Column Shift Type:
    Remove the instrument side panel .

  1. for Floor Shift Type:
    Remove the instrument side panel .



4. INSTALL COWL SIDE TRIM BOARD LH
  1. for Regular Cab:
    Install the cowl side trim board .

  1. for Double Cab:
    Install the cowl side trim board .

  1. for CrewMax:
    Install the cowl side trim board .



5. INSTALL FRONT DOOR SCUFF PLATE LH
  1. for Regular Cab:
    Install the front door scuff plate .

  1. for Double Cab:
    Install the front door scuff plate .

  1. for CrewMax:
    Install the front door scuff plate .