SEAT HEATER SWITCH (w/ Seat Heater System or Climate Control Seat System) > INSTALLATION |
| 1. INSTALL SEAT HEATER SWITCH |
![]() |
w/ Climate Control Seat System:
Attach the 8 claws to install the 2 seat heater switches.
![]() |
w/ Seat Heater System:
Attach the 4 claws to install the 2 seat heater switches.
| 2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Connect the connector.
Attach the 4 clips to install the panel.
| 3. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Connect the connectors.
Attach the 4 clips to install the finish panel.
| 4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
w/ Trailer Towing System:
Connect the connector.
Attach the 6 clips to install the console panel.
Install the clip.

| 5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 12 clips to install the console panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 7. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Attach the 12 clips to install the finish panel.
Connect the connector and attach the wire harness clamp.
| 8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
for Automatic Air Conditioning System:
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 bolts.
Install the hood lock control lever.
| 9. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 10. INSTALL COWL SIDE TRIM BOARD LH |
![]() |
Attach the 2 clips to install the cowl side trim board.
Install the clip.
| 11. INSTALL FRONT DOOR SCUFF PLATE LH |
![]() |
Attach the 6 claws and 3 clips to install the front door scuff plate.