Home › SECURITIES › THEFT DETERRENT › GLASS BREAKAGE SENSOR (for Column Shift Type)

GLASS BREAKAGE SENSOR (for Column Shift Type) > REMOVAL



1. REMOVE FRONT DOOR SCUFF PLATE LH
  1. for Regular Cab:
    Remove the front door scuff plate .

  1. for Double Cab:
    Remove the front door scuff plate .

  1. for CrewMax:
    Remove the front door scuff plate .



2. REMOVE COWL SIDE TRIM BOARD LH
  1. for Regular Cab:
    Remove the cowl side trim board .

  1. for Double Cab:
    Remove the cowl side trim board .

  1. for CrewMax:
    Remove the cowl side trim board .



3. REMOVE CENTER LOWER INSTRUMENT COVER


  1. Remove the 2 clips and cover.


    B171284E01



4. REMOVE INSTRUMENT SIDE PANEL LH


    B226739
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B226740
  1. Remove the hood lock control lever.

  1. Remove the 2 bolts.

  1. Detach the 9 clips and claw.



    B163883
  1. for Automatic Air Conditioning System:
    Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B227982
  1. Disconnect the connector and detach the wire harness clamp.

  1. Detach the 12 clips and remove the finish panel.



7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY


8. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Remove the 2 screws.

  1. Detach the 4 clips.

  1. Remove the finish panel and then disconnect the connectors.



9. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    B161766
  1. Detach the 2 claws and remove the door box.



    B161767
  1. Remove the 4 screws.

  1. Detach the 4 clips and remove the cup holder.



10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


E146074E06
  1. Detach the 4 clips.

  1. Disconnect the connector and remove the panel.



11. REMOVE GLASS BREAKAGE SENSOR MICROPHONE


B166529
  1. Detach the 2 claws and remove the sensor.