SEAT HEATER SWITCH (w/ Seat Heater System or Climate Control Seat System) > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
![]() |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
| 2. REMOVE COWL SIDE TRIM BOARD LH |
![]() |
Remove the clip.
Detach the 2 clips and remove the cowl side trim board.
| 3. REMOVE INSTRUMENT SIDE PANEL LH |
![]() |
Using a moulding remover, detach the 7 claws and remove the side panel.
| 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 9 clips and claw.
![]() |
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Disconnect the connector and detach the wire harness clamp.
Detach the 12 clips and remove the finish panel.
| 6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 8. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the clip.
Detach the 6 clips and remove the console panel.
w/ Trailer Towing System:
Disconnect the connector

| 9. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Detach the 4 clips and remove the finish panel.
Disconnect the connectors.
| 10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY |
![]() |
Detach the 4 clips.
Disconnect the connector and remove the panel.
| 11. REMOVE SEAT HEATER SWITCH |
![]() |
w/ Seat Heater System:
Detach the 4 claws and remove the 2 seat heater switches.
![]() |
w/ Climate Control Seat System:
Detach the 8 claws and remove the 2 seat heater switches.