TIRE PRESSURE WARNING RESET SWITCH > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
![]() |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
| 2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, for CrewMax) |
![]() |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
| 3. REMOVE COWL SIDE TRIM BOARD LH |
![]() |
Remove the clip.
Detach the 2 clips and remove the cowl side trim board.
| 4. REMOVE INSTRUMENT SIDE PANEL LH |
![]() |
Using a moulding remover, detach the 7 claws and remove the side panel.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 9 clips and claw.
![]() |
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 6. REMOVE TIRE PRESSURE WARNING RESET SWITCH |
![]() |
Disconnect the switch connector.
Detach the 2 claws and remove the reset switch.