REAR BUMPER (for Steel Type Bumper) > DISASSEMBLY |
| 1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
![]() |
While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the ultrasonic sensor.
| 2. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) |
![]() |
Detach the 2 claws and remove the sensor retainer from the rear bumper.
| 3. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) |
![]() |
While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the ultrasonic sensor.
| 4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) |
![]() |
Detach the 2 claws and remove the sensor retainer from the rear bumper.