Home › BODY › INTERIOR › ROOF HEADLINING (for Regular Cab)

ROOF HEADLINING (for Regular Cab) > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL ROOF HEADLINING ASSEMBLY


B166525
  1. Place the roof headlining in the cabin as shown in the illustration.

    NOTICE:
    Be careful not to damage the roof headlining when placing it in the cabin.



    B165724
  1. Attach the 3 clips to install the roof headlining.



    B229072
  1. Connect the roof wire connector and attach the 3 clamps.



    B167283
  1. w/ EC Mirror:

    1. Connect the EC mirror connector.



2. INSTALL COAT HOOK


B165719
  1. Install the coat hook with the screw.

  1. Attach the 2 claws to install the coat hook cap.



3. INSTALL ASSIST GRIP PLUG


B165717
  1. Install a new assist grip plug.



4. INSTALL ASSIST GRIP SUB-ASSEMBLY


B165740
  1. Install the 2 clips and 2 covers to the assist grip, as shown in the illustration.

  1. Install the assist grip.



5. INSTALL VISOR HOLDER


B165713
  1. Install the visor holder with the screw.

    HINT:
    Use the same procedure to install the visor holder on the other side.



6. INSTALL VISOR ASSEMBLY LH


B165715
  1. Install the visor with the 3 screws.



7. INSTALL VISOR ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



8. INSTALL VISOR BRACKET COVER LH


B166262
  1. Attach the 4 claws to install the visor bracket cover.



9. INSTALL VISOR BRACKET COVER RH

HINT:
Use the same procedures described for the LH side.



10. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)


B227101
  1. Attach the 2 claws of the inner rear view mirror stay holder cover to the mirror, and then slide the inner rear view mirror stay holder cover in the direction indicated by the arrow in the illustration to attach the 2 claws to the roof headlining and install the inner rear view mirror stay holder cover.



11. INSTALL ROOF CONSOLE BOX ASSEMBLY
  1. Connect the connector.



  1. Install the roof console box with the 4 screws.


    B167127E03



12. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH


B165725
  1. Attach the 5 clips to install the front quarter trim panel.

  1. Install the 2 bolts.



    B165726
  1. Connect the shoulder anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B165727
  1. Attach the 2 claws to close the seat belt anchor cover.



    B165712
  1. Attach the claw to install the cover.



13. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



14. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH


B165710
  1. Attach the 7 clips to install the lower quarter trim panel.



    B166849
  1. Twist the seat belt clockwise and connect the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B165729
  1. Attach the 2 claws to install the cover.



15. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH


B164745
  1. Attach the 8 clips to install the lower quarter trim panel.



    B167430
  1. Twist the seat belt counterclockwise and connect the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B164750
  1. Attach the 2 claws to install the cover.



16. INSTALL FRONT PILLAR GARNISH LH
  1. Attach the claw to install the front pillar garnish.

  1. Install the assist grip with the 2 bolts.



  1. Attach the 2 claws to install the 2 assist grip plugs.


    B165706



17. INSTALL FRONT PILLAR GARNISH RH

HINT:
Use the same procedures described for the LH side.



18. INSTALL LUGGAGE COMPARTMENT BOX RH


B164748
  1. Install the luggage compartment box with the 4 clips.



19. INSTALL LUGGAGE COMPARTMENT BOX LH


B164747
  1. Attach the 3 claws to install the luggage compartment box.

  1. Install the 2 clips.



20. INSTALL UPPER BACK PANEL GARNISH


B164740
  1. Attach the 10 clips to install the upper back panel garnish.



21. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip.



22. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
  1. Install the front door opening trim weatherstrip.



23. INSTALL COWL SIDE TRIM BOARD LH


B165704
  1. Attach the 2 clips to install the cowl side trim board.

  1. Install the clip.



24. INSTALL COWL SIDE TRIM BOARD RH

HINT:
Use the same procedures described for the LH side.



25. INSTALL FRONT DOOR SCUFF PLATE LH


B165843
  1. Attach the 6 claws and 3 clips to install the front door scuff plate.



26. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedures described for the LH side.



27. INSTALL FRONT SEAT ASSEMBLY (for Center Seat)
  1. Install the front seat assembly (Click here).



28. INSTALL FRONT SEAT ASSEMBLY (for Fold Down Seat Type)
  1. Install the front seat assembly (Click here).



29. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Install the front seat assembly (Click here).



30. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


31. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).