Home › ENGINE ยท 1GR-FE › ENGINE CONTROL SYSTEM › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here



1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    A240674E01
  1. Disconnect the 2 clamps and connector.

  1. Using SST, remove the sensor.

    SST
    09224-00010  



2. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    A240676E01
  1. Disconnect the connector.

  1. Using SST, remove the sensor.

    SST
    09224-00010