Home › ENGINE · 1UR-FE › STARTING › ACC RELAY

ACC RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT MAIN BODY ECU (ACC RELAY)



A160907E01

  1. Measure the resistance of the ACC relay circuit.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      DD-47 - DD-8
      When battery voltage is not applied between DD-45 and DD-62
      10 kΩ or higher
      When battery voltage is applied between DD-45 and DD-62
      Below 1 Ω

      If the result is not as specified, replace the main body ECU.