Home › ENGINE ยท 1GR-FE › EMISSION CONTROL › AIR PUMP

AIR PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL AIR PUMP
  1. Install the pump and 3 air pump insulators to the bracket and attach the 2 clamps.



2. INSTALL NO. 1 AIR INJECTION SYSTEM HOSE
  1. Install the No. 1 air injection system hose to the air pump.



3. INSTALL AIR PUMP INLET


    A273861E01
  1. Install the air pump inlet to the No. 1 air injection system hose to install it, and then slide the clip onto the hose.
    Text in Illustration 
    *1
    Stopper
    *2
    Air Pump
    *3
    Air Hose
    *4
    Air Inlet

    HINT:
    Insert the inlet until the inlet stoppers are aligned with the hose end.

  1. Install the 2 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }