REAR BODY SIDE PANEL PROTECTOR > REMOVAL |
| 1. REMOVE REAR BODY SIDE PANEL PROTECTOR LH |
for Standard Deck:
Remove the rear body side panel protector.
Apply protective tape to the outer circumference of the protector.
Using a moulding remover, detach the 24 clips and remove the protector.

for Long Deck:
Remove the rear body side panel protector.
Apply protective tape to the outer circumference of the protector.
Using a moulding remover, detach the 28 clips and remove the protector.

for CrewMax:
Remove the rear body side panel protector.
Apply protective tape to the outer circumference of the protector.
Using a moulding remover, detach the 20 clips and remove the protector.

| 2. REMOVE REAR BODY SIDE PANEL PROTECTOR RH |