FRONT SEAT ASSEMBLY (for Power Seat) > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat.
Connect the seat wire connectors under the seat.
Connect the cable to the negative (-) battery terminal.
![]() |
w/ Leg Support Adjustment Switch:
Operate the leg support adjustment switch to move the seat cushion to the closed position.
Operate the power seat switch to move the seat to the rearmost position.
![]() |
Install the 2 bolts.
Operate the power seat switch to move the seat to the foremost position.
![]() |
Install the 2 bolts.
| 2. INSTALL OUTER FRONT SEAT TRACK COVER LH REAR |
![]() |
Attach the 2 claws to install the seat track cover.
| 3. INSTALL INNER FRONT SEAT TRACK COVER LH REAR |
![]() |
Attach the 2 claws to install the seat track cover.
| 4. INSTALL FRONT SEAT HEADREST ASSEMBLY LH |
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).
| 6. INSPECT FRONT SEAT ASSEMBLY |
Check the power seat operation (Click here).
w/ Seat Heater System:
Check the seat heater operation.
Turn the ignition switch ON.
When the seat heater switch is turned ON, check that the indicator light illuminates, and that the seat surface warms up in approximately 5 minutes.
When the seat heater switch's volume switch is operated, check that the seat surface temperature changes.
w/ Climate Control Seat System:
Check the climate control seat operation (Click here).