FRONT SEAT ASSEMBLY (for Center Seat) > DISASSEMBLY |
| 1. REMOVE CENTER SEATBACK PANEL |
![]() |
Detach the 4 claws and 4 clips, and remove the center seatback panel.
![]() |
for Double Cab:
Remove the 2 screws.
Detach the 4 clips and remove the center seatback panel.
Disconnect the power outlet socket connector.
![]() |
for CrewMax:
Detach the 4 claws and 4 clips, and remove the center seatback panel.
Disconnect the 2 connectors.
| 2. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab) |
![]() |
Using a screwdriver, detach the claw and remove the power outlet socket.
| 3. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab) |
![]() |
Detach the 2 claws and remove the power outlet socket cover.
| 4. REMOVE NO. 2 CONSOLE BOX REGISTER ASSEMBLY (for CrewMax) |
![]() |
Remove the 3 screws and register.
| 5. REMOVE NO. 1 CONSOLE BOX REGISTER ASSEMBLY (for CrewMax) |
![]() |
Remove the 3 screws and register.
| 6. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL (for CrewMax) |
![]() |
for AC Power Supply:
Disconnect the clamp.
Remove the 4 screws and bezel.
| 7. REMOVE REAR POWER OUTLET SOCKET (for Standard) |
![]() |
Detach the claw and remove the power outlet socket.
| 8. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard) |
![]() |
Detach the 2 claws and remove the power outlet socket cover.
| 9. REMOVE REAR POWER POINT SOCKET (for AC Power Supply) |
![]() |
Detach the 2 claws and remove the power outlet socket.
| 10. REMOVE VIDEO TERMINAL (for CrewMax) |
![]() |
Detach the clamp from the back panel.
![]() |
Detach the 4 claws and remove the video terminal.
| 11. REMOVE CENTER SEAT CUSHION SHIELD LH |
![]() |
Using a T30 "TORX" socket, remove the bolt.
Detach the 7 claws and 2 clips, and remove the cushion shield.
| 12. REMOVE CENTER SEAT CUSHION SHIELD RH |
![]() |
Using a T30 "TORX" socket, remove the bolt.
Detach the 7 claws and 3 clips, and remove the cushion shield.
| 13. REMOVE CENTER FRONT SEAT CUSHION ASSEMBLY |
![]() |
Remove the 2 bolts and seat cushion.
| 14. REMOVE REAR SEAT LOCK LATCH |
![]() |
Using a T30 "TORX" socket, remove the 2 bolts.
![]() |
Unfasten the button and remove the seat lock latch.
| 15. REMOVE CENTER FRONT SEAT CUSHION COVER |
![]() |
Detach the 3 hooks and remove the seat cushion cover.
| 16. REMOVE CENTER FRONT SEAT CUSHION PAD |
![]() |
Remove the hog rings and seat cushion pad.
| 17. REMOVE CENTER FRONT SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and inner belt.
| 18. DISCONNECT CENTER FRONT SEAT BELT ASSEMBLY RH |
![]() |
Remove the bolt and disconnect the seat belt.
| 19. REMOVE CENTER SEATBACK ASSEMBLY |
![]() |
Remove the 2 wire harness clamps from the center seatback frame.
![]() |
LH Side:
Using a T40 "TORX" socket, remove the 2 bolts.
RH Side:
Using a T55 "TORX" socket, remove the 2 bolts.
Remove the center seatback.
| 20. REMOVE FOLD SEAT STOPPER CUSHION |
![]() |
Using a T20 "TORX" socket, remove the 2 screws and 2 cushions.
| 21. REMOVE FRONT SEAT UNDER TRAY |
![]() |
Disconnect the power outlet socket connector.
![]() |
Using a T30 "TORX" socket, remove the 2 bolts and under tray.
| 22. REMOVE POWER OUTLET SOCKET ASSEMBLY |
![]() |
Disconnect the power outlet socket connector.
Using a screwdriver, detach the claw and remove the power outlet socket.
| 23. REMOVE CENTER POWER OUTLET SOCKET COVER |
![]() |
Detach the 2 claws and remove the power outlet socket cover.
| 24. REMOVE CONSOLE BOX WIRE |
![]() |
Detach the 4 clamps and remove the console box wire.
| 25. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 26. REMOVE FRONT SEAT SHOULDER BELT COVER |
![]() |
Using a T10 "TORX" socket, remove the 2 screws and shoulder belt cover.
| 27. REMOVE UPPER REAR SEATBACK LOCK BEZEL |
![]() |
Detach the 4 claws and remove the lock bezel.
Disconnect the seat belt from the shoulder belt cover.
| 28. REMOVE LOWER FRONT SEAT SHOULDER BELT COVER |
![]() |
Using a T30 "TORX" socket, remove the 2 bolts and shoulder belt cover.
| 29. REMOVE RECLINING REMOTE CONTROL BEZEL |
![]() |
Detach the 2 clips and claw, and then remove the bezel.
| 30. REMOVE FRONT SEAT TRAY |
![]() |
Detach the 5 clips and remove the tray.
| 31. REMOVE CENTER FRONT SEAT ARMREST COVER |
![]() |
Remove the 2 screws and armrest cover.
| 32. REMOVE SEAT FASTENER COVER |
![]() |
Using a screwdriver, detach the 6 claws and remove the 2 covers.
| 33. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY |
![]() |
Remove the 6 screws.
![]() |
Detach the 21 claws and remove the screw.
![]() |
LH Side:
Disconnect the cable from the center seatback frame inner side.
![]() |
RH Side:
Disconnect the cable from the center seatback frame inner side.
| 34. REMOVE FRONT SEAT HEADREST SUPPORT |
![]() |
Detach the 4 claws and remove the 2 headrest supports.
| 35. REMOVE CENTER FRONT SEATBACK COVER |
| 36. REMOVE CENTER SEATBACK PAD |
| 37. REMOVE CENTER SEAT RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Detach the claw and remove the cover.
| 38. REMOVE CENTER SEAT RECLINING ADJUSTER INSIDE COVER RH |
Detach the claw and remove the cover.
| 39. REMOVE CENTER FRONT SEAT BELT ASSEMBLY |
![]() |
Remove the nut and bolt, and then detach the 2 claws and remove the center seat belt.