Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Double Cab)

REAR SEAT ASSEMBLY (for Double Cab) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT ASSEMBLY


    B166544
  1. Attach the 4 hooks on the back side of the seat and install it.

    NOTICE:
    Be careful not to damage the vehicle body.



    B165600E01
  1. Install the 6 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Tighten the bolts in the order indicated in the illustration.



2. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B166553
  1. Insert the seat inner belts.



3. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    B167983E01
  1. Connect the rear seat center seat outer belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.



4. INSTALL SEAT FLOOR BOX (w/ Seat Under Tray)


B165790
  1. Attach the claw to install the seat floor box.

  1. Install the 4 knobs.



5. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Seat Under Tray)


B166416E01
  1. Attach the hooks to install the cover. Then close the cover and turn the knob.



6. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Seat Under Tray)


    B166415E01
  1. Attach the hooks to install the cover. Then close the cover and turn the knob.



    B166545
  1. Pull the 2 seat adjusting handles and fold down the seat cushion.