REAR SEAT ASSEMBLY (for Double Cab) > REMOVAL |
| 1. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Seat Under Tray) |
![]() |
Pull the 2 reclining adjusting handles and fold up the seat cushion.
![]() |
Turn the knob and open the cover. Then detach the hooks and remove the cover.
| 2. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Seat Under Tray) |
![]() |
Turn the knob and open the cover. Then detach the hooks and remove the cover.
| 3. REMOVE SEAT FLOOR BOX (w/ Seat Under Tray) |
![]() |
Remove the 4 knobs.
Detach the claw and remove the seat floor box.
| 4. REMOVE REAR SEAT INNER BELT ASSEMBLY |
![]() |
Pull out the rear seat inner belts.
| 5. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and disconnect the outer belt.
| 6. REMOVE REAR SEAT ASSEMBLY |
![]() |
Remove the 6 bolts.
![]() |
Lift the seat assembly to detach the 4 hooks, and remove the seat.