Home › BODY › SEAT › SEAT MEMORY SWITCH (w/ Seat Position Memory System)

SEAT MEMORY SWITCH (w/ Seat Position Memory System) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    B165648E02
  1. Using a screwdriver, detach the 4 claws and remove the inside handle bezel.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT ARMREST UPPER BASE PANEL LH


    B166211
  1. Using a screwdriver, detach the 2 clips and front armrest upper base panel.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connectors.



3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    B168274E01
  1. Detach the 3 clips and remove the door lower frame bracket garnish.



4. REMOVE FRONT DOOR ARMREST COVER LH


5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    B166215E01
  1. Remove the 2 screws.

  1. Using a clip remover, remove the clip.

  1. Detach the 9 clips and remove the trim cover. Then disconnect the connector.



    B165654E01
  1. Disconnect the 2 cables from the inside handle.

  1. Remove the inside handle.



6. REMOVE SEAT MEMORY SWITCH


    B166227
  1. Remove the 2 screws and seat memory switch.