Home › BODY › SEAT › FRONT POWER SEAT MOTOR ASSEMBLY (for Power Seat)

FRONT POWER SEAT MOTOR ASSEMBLY (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY LH


    B161051E14
  1. Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Front
      Battery positive (+) → 2
      Battery negative (-) → 1
      Rear

      If the result is not as specified, replace the seat frame with adjuster assembly.



    B161051E15
  1. Check operation of the seat frame (front vertical motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Up
      Battery positive (+) → 2
      Battery negative (-) → 1
      Down

      If the result is not as specified, replace the seat frame with adjuster assembly.



    B161051E16
  1. Check operation of the seat frame (lifter motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Up
      Battery positive (+) → 1
      Battery negative (-) → 2
      Down

      If the result is not as specified, replace the seat frame with adjuster assembly.



    B161051E17
  1. Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Front
      Battery positive (+) → 1
      Battery negative (-) → 2
      Rear

      If the result is not as specified, replace the seat frame with adjuster assembly.



    B161051E18
  1. Check operation of the seat frame (leg support adjustment motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the leg support adjustment motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      Open
      Battery positive (+) → 2
      Battery negative (-) → 1
      Close

      If the result is not as specified, replace the seat frame with adjuster assembly.



2. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY RH


    B161051E14
  1. Check operation of the seat frame (slide motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Front
      Battery positive (+) → 1
      Battery negative (-) → 2
      Rear

      If the result is not as specified, replace the seat frame with adjuster assembly.



    B161051E17
  1. Check operation of the seat frame (reclining motor).

    1. Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Battery positive (+) → 2
      Battery negative (-) → 1
      Front
      Battery positive (+) → 1
      Battery negative (-) → 2
      Rear

      If the result is not as specified, replace the seat frame with adjuster assembly.