Home › BODY › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat)

LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


B165798E01
  1. Check operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Hold
      Battery positive (+) → 2
      Battery negative (-) → 1
      Release

      If the result is not as specified, replace the lumbar support adjuster assembly.



2. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH


B165798E03
  1. Check operation of the lumbar support adjuster.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminals.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Hold
      Battery positive (+) → 1
      Battery negative (-) → 2
      Release

      If the result is not as specified, replace the lumbar support adjuster assembly.