CURTAIN SHIELD AIRBAG CUTOFF SWITCH > INSTALLATION |
| 1. INSTALL CURTAIN SHIELD AIRBAG CUTOFF SWITCH |
![]() |
Attach the 2 claws to install the switch.
Connect the connector.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
for Automatic Air Conditioning System:
Attach the 2 claws to install the sensor.
![]() |
Connect the connectors.
Attach the 9 clips and claw to install the finish panel.
Install the 2 bolts.
Install the hood lock control lever.
| 3. INSTALL INSTRUMENT SIDE PANEL LH |
![]() |
Attach the 7 claws to install the side panel.
| 4. INSTALL COWL SIDE TRIM BOARD LH |
![]() |
Attach the 2 clips to install the cowl side trim board.
Install the clip.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) |
![]() |
Attach the 6 claws and 3 clips to install the front door scuff plate.
| 6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
![]() |
Attach the 6 claws and 3 clips to install the front door scuff plate.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 8. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).